Completely Digital Two-Visit Immediately Loaded Implants: Proof of Concept.

Implant dentistry has become a common treatment alternative, yet only a small percentage of patients missing teeth are receiving its benefits. Significant limitations are the small percent of practitioners placing implants due to the long learning curve, as well as the time commitment on the part of the patient. This proof of concept demonstrates clinical implant treatment requiring years of manual skill development on the part of the surgeon, restorative dentist, and technician can be accomplished in 2 visits, completely digitally, without the need for conventional impressions, laboratory procedures, and advanced manual skills. This technique results in reduced learning curve and treatment time. The first visit consists of consultation, diagnosis, CT and optical surface scans of the implant site to include: soft tissue, adjacent teeth, and opposing arch. This digital information is imported and interactively reconstructed in a 3-D open format implant planning software. The implant and restoration are now precisely planned into the optimal bone position with the ideal emergence profile for biologically and esthetically designed restoration. This information is then electronically forwarded to a production facility, where all necessary models are digitally printed and the immediate crown is digitally milled. On the second visit, the patient returns for guided implant insertion and immediate restoration. As digital procedures are refined, many more dental professionals will become involved in providing implant therapy earlier in their careers. This promises to result in reduced costs, making implants available to millions more patients who could benefit from them.

Papilla Formation in Response to Computer-Assisted Implant Surgery and Immediate Restoration.

This retrospective analysis was undertaken to evaluate the effect of immediate implant restoration using a computer-assisted technique in partially edentulous sites on interimplant and intertooth bone level stability and papilla formation. Nine partially edentulous patients received a total of 23 implants that supported immediately placed implant restorations. Planning was accomplished using a radiographic guide, which allowed visualization of the emergence profile from the platform of the implant to the cervical of the planned restoration. Guided implants were placed according to the manufacturer's instructions, and restorations were screw retained directly to the implant. Multiple implants were splinted at surgery with autopolymerizing resin. Measurements were made at a mean of 545 days (range 288-958) postoperatively on the basis of radiographs and photographs. Measures were: (1) distance from bone crest to platform, (2) bone crest to contact point, (3) interimplant distance at the outer diameter of the platform, and (4) papilla from highest point to a reference line. At follow-up time, the bone ridge was located higher than the implant platform (mean 0.57 mm) compared to implants whose interimplant distance was less than 3 mm (mean 0.27 mm). Mean increase of the bone level between insertion and approximate 1-year follow-up was 0.047 mm. The mean distance from the contact point to bone was 2.39/3.93 mm postoperatively, resulting in 91/71% papilla fill between implants and between implant and adjacent tooth, respectively. Computer-assisted surgery with the preplanned immediate restoration seems to be an effective method to minimize bone loss at the implant platform resulting in support for papilla.

Why guided when freehand is easier, quicker, and less costly?

Computer-assisted implant planning and subsequent production of a surgical template based on this plan has gained attention because it provides restoratively driven esthetics, patient comfort, satisfaction, and the option of flapless surgery and immediate restoration. However, it adds expense and requires more time. Another significant but not so apparent advantage may be improved survival and success over freehand techniques in types III and IV bone. This retrospective analysis was undertaken to examine that possibility. It reports 1-year outcome for 80 implants in 27 consecutively presenting patients treated over a 7-year period using computer-assisted techniques across all bone qualities in commonly encountered treatment indications in private practice. Implants were placed to support single teeth, small bridges, and complete arch restorations in exposed or immediately restored applications, based on primary stability as determined by insertion torque, resonance frequency analysis, and Periotest. For the 80 implants supporting 35 restorations, the median observation period is 2.66 years; 73 implants supporting prostheses in 22 patients had readable radiographs at 1 year. There was a 1-year overall implant survival and a success rate of 100%. Radiographic analysis demonstrated the change in bone level from the platform at 1-year is less than 2 mm. Intra-operative median measurements of primary stability were insertion torque, 40 Ncm; resonance frequency, 76 ISQ; and Periotest, -3. All intra-operative measurements were consistent for acceptable primary stability regardless of bone density. Restoratively driven diagnosis and precision planning and initial fit were possible with computer-assisted techniques resulting in the achievement of high primary stability, even in areas of less dense bone. The ability to plan implant position, drill sequence, and implant design on the basis of predetermined bone density gives the practitioner enhanced pretreatment information which can lead to improved outcome.

Guided flapless surgery with immediate loading for the high narrow ridge without grafting.

Computer guided implant treatment allows implants and associated restorations to be precisely placed during the same procedure directly through the gingiva with reduced postoperative complications and surgical time. When bone height is adequate but very narrow, the virtual guided sleeve is often placed too deeply into the ridge crest interfering with the seating of the surgical template. This case report of a patient exhibiting very narrow residual ridges due to severe resorption describes a new computer guided procedure using a single surgical template maintaining bone height and immediate restoration without a mucoperiosteal flap. The success of this technique is the result of innovative modifications in the software as well as instrumentation. Modifications include planning a different implant length virtually to raise the position of guide sleeves, alteration of drilling sequences, modifications of the start drill, incorporation of osteotomes, and use of an alternative implant seating mount. The combination of these methods allows for deeper site preparation and implant seating beyond the default settings, without any crestal bone reduction. These modifications not only make the guided concept possible for the entire preparation and seating procedures, but also allow for the slight removal of bone that would interfere with the implant seating through the surgical template without a mucoperiosteal flap. This new approach to computer guided surgery maintains prosthetic precision in the fabrication of a provisional restoration prior to implantation with minimal delivery adjustments using prefabricated conical abutments when placing implants at differing levels into the high narrow ridge.

To immediately load, expose, or submerge in partial edentulism: a study of primary stability and treatment outcome.

PURPOSE: This study was undertaken to assess the predictive usefulness of preoperative bone density, as measured by computed tomography (CT), and the intraoperative implant stability measures of insertion torque (IT), Periotest values (PTV), and resonance frequency analysis (ie, implant stability quotient [ISQ]) toward developing an algorithm for successful immediate loading, one-step exposure, or submergence of dental implants. MATERIALS AND METHODS: Consecutively presenting patients requesting immediate loading in areas other than the anterior mandible were analyzed retrospectively. The implants were either immediately loaded, left exposed, or submerged on the basis of preoperative CT bone density and intraoperative primary stability measures. All implants surviving the traditional healing period were verified for osseointegration. RESULTS: Eighteen patients were analyzed retrospectively, and they received 58 implants. Seven implants failed, for a survival rate of 88%. Primary stability measurements at insertion were correlated with one another and with preoperative CT bone density. Preoperative mean bone density for surviving implants was greatest for immediately loaded implants (983 ± 83), lower for exposed implants (803 ± 29), and lowest (480 ± 23) for submerged implants. Bone density was significantly different between submerged implants that failed and those that survived. Mean IT for successful implants was higher than for those that failed. Mean PTVs were lower (ie, better) for successful versus failed implants, although this difference was significant only for submerged implants. CONCLUSIONS: In this group of patients, objective measures of bone density by CT, IT, PTV, and ISQ correlated with each other and therefore may provide a useful algorithm for making clinical implant loading decisions. Of the technologies applied in this group of patients, PTV was the most reliable predictor at implant placement of failure to osseointegrate.

Immediate loading as a vehicle for interdisciplinary training in implant placement and restoration.

Recently, implant surgery has been introduced into postdoctoral prosthodontic programs; however, efficient training models to teach this have not been described to date. For training models to be effective and acceptable to all parties, a mutually beneficial situation must be created, and guidelines that can be followed easily need to be described. The purpose of this report is to suggest immediate loading of dental implants as an example for an interdisciplinary training model that integrates both the surgical aspects of implant therapy into the education of prosthodontic graduate students and the prosthodontic aspects of implant therapy into the training of periodontal graduate students. A flow chart of training steps is described for a patient treated with an immediately loaded mandibular fixed full-arch prosthesis on five interforaminal implants. Both the prosthodontic and the periodontal residents were involved in all phases of treatment. These postdoctoral students were in the final year of their program. Therefore, individual treatment steps could be taught interchangeably and accomplished by the student of the other specialty under the supervision of a clinical instructor. The unique characteristic of the immediate loading procedure, which includes surgical implant placement as well as immediate conversion of an existing denture into a fixed implant-supported provisional prosthesis, allows each postgraduate student to experience detailed surgical and prosthodontic treatment in a controlled environment on the day of surgery.

Immediate loading as a vehicle for interdisciplinary training in implant placement and restoration.

Recently, implant surgery has been introduced into postdoctoral prosthodontic programs; however, efficient training models to teach this have not been described to date. For training models to be effective and acceptable to all parties, a mutually beneficial situation must be created, and guidelines that can be followed easily need to be described. The purpose of this report is to suggest immediate loading of dental implants as an example for an interdisciplinary training model that integrates both the surgical aspects of implant therapy into the education of prosthodontic graduate students and the prosthodontic aspects of implant therapy into the training of periodontal graduate students. A flow chart of training steps is described for a patient treated with an immediately loaded mandibular fixed full-arch prosthesis on five interforaminal implants. Both the prosthodontic and the periodontal residents were involved in all phases of treatment. These postdoctoral students were in the final year of their program. Therefore, individual treatment steps could be taught interchangeably and accomplished by the student of the other specialty under the supervision of a clinical instructor. The unique characteristic of the immediate loading procedure, which includes surgical implant placement as well as immediate conversion of an existing denture into a fixed implant-supported provisional prosthesis, allows each postgraduate student to experience detailed surgical and prosthodontic treatment in a controlled environment on the day of surgery.

Computer-guided Implant dentistry.

Computer-guided minimally invasive implant treatment promises to revolutionize the way we practice implant dentistry. This new technology allows implants and associated restorations to be precisely placed at the same procedure directly through the gingiva in an hour or less. Since there is no incision, there is minimal postoperative discomfort or swelling and no sutures.